Features & Specs
Final Inspection
Solar Panel Inspection Device
This table design device is used to final inspect solar modules prior to packing.
Effective Inspection Area | 2000 x 1100 mm |
Light Source | HID |
Spectrum | According to IEC60904-9 |
Light Intensity | 100 mW/cm2 (Adjustable Between 20~120 mW/cm2) |
Light Intensity Uniformity | ≤ ± 3% |
Irradiation Stability | ± 1% |
Effective Inspection Wattage | 5 ~ 280 W |
Measuring Voltage | 0V ~ 30V/60V (Resolution 1mV) |
Measuring Current | 0mA ~ 2A/20A (Resolution 1mA) |
Measuring Wattage | 20W ~ 300W |
Measuring Load | 10A / 50V |
Measuring Temperature | 15℃ ~ 35℃ (Resolution 0.1℃) |
Measuring Repeated Accuracy | ± 1% |
Data Collecting Time | 2 ms |
Electrical Property Measuring Accuracy | ≤ 2% |
Measuring Method | 4 Wires Connection |
Testing Parameters | Isc / Voc / Pm / Vm / Im / FF / EFF |
Testing Time | 5 sec/pc |
Testing Condition Calibration | Automatic (Includes Compensation Parameters Input, Temperature Compensation & Light Intensity Compensation) |
Voltage | 220V / Single Phase / 50Hz |
Power | 2 KW |
Outer Dimension (LxWxH) | 2500 x 1300 x 850 mm |