|
| |
Model
Number GU-371A |
|
| |
|
| |
| Brief
Description |
This Machine is designed for grinding
and polishing a bevel edge, with bottom
pencil edge grinding.
Motors that move in parallel adapt to
different glass thickness drive the
front beam, with digital readout on
control panel.
A control system adopts a Mitsubishi
PLC control unit, which has automatic
and manual control functions, used for
setting parameters. The operator can
preset the thickness of glass to be
processed, the remaining thickness after
grinding, and the width and angle of
bevel edge.
Working speed is adjustable through
a steeples reducer, meeting the demands
for different size and thickness of
glass.
Amp meters allow you to check the wheel
absorption and therefore it’s correct
functioning.
Spindles use drag plate structures,
which eliminates vibration while working.
All spindles use high quality precision
ABB motors
Input and output conveyor uses a timing
belt, which improve the transmission
of glass.
Polishing wheels use pneumatic cylinder
for smooth engagement of glass and even
polish.
Manual oil supply system is equipped
with machine for good lubrication conditions.
|
| |
| Technical
Data |
1. Power
supply: 3-Phase, Voltage: 380/220V, Frequency:
50 / 60Hz, as required. Total installed
power: 26.01 kW.
2. Glass processing range:
3. Glass Thickness: 3~20 mm
4. Min. Size: 100mm×100mm
5. Bevel width: 0~40mm (100mm×100mm max
bevel width <15mm)
6. Bevel angle: 3o~25o
7. Max. Weight: 300kg
8. Processed profile: Bevel and pencil
edge
9. Glass feeding speed: From 0.5m/min-3.0
m/min.
10. Inlet/Outlet conveyor: Timing belt
11. Glass thickness, bevel angle and bevel
width adjustment: AC motor with encoder
controlled by PLC, parameters displayed
on the monitor.
12. Glass removal speed adjustment: Manual
adjustment a turning button on the control
panel to change the frequency of a converter.
13. Water pump: AC motors 0.25 kW/0.12kW
14. Operating method: Continuous running
and manual feeding.
15. Overall dimensions: 8000x1210x2600mm
16. Total weight: 5800 kg. |
| |
| Wheels
configuration |
All bevel
wheels are Cup shape with O.Dф150mm I.D.ф50mm,
pencil wheel is peripheral with O.Dф175mm
I.D.ф22mm. All motors are AC type (ABB
motor).
Pos.1. Diamond wheel, grain size #80,
2.2kW for bevel
Pos.2. Diamond wheel, grain size #230,
2.2kW for bevel
Pos.3. Diamond peripheral wheel, grain
size #180, 1.75kW for pencil edge
Pos.4. Diamond wheel, grain size #320,
2.2kW for bevel
Pos.5. Resin wheel, grain size #240, 2.2kW
for bevel
Pos.6. Resin wheel, grain size #360, 2.2kW
for bevel
Pos.7. Resin wheel, grain size #480, 2.2kW
for bevel
Pos.8. Resin wheel, grain size #600, 2.2kW
for bevel
Pos.9. Felt, 1.5kW for bevel polishing
Pos.10. Felt, 1.5kW for bevel polishing
Pos.11. Felt, 1.5kW for bevel polishing |
|
|
| |
Technical
Specification |
| This machine is used for
rough and fine grinding and polishing bevel
edge of flat glass, as well as the grinding
of bottoms. It adopts chainless roll transmit
plate to transfer glass, with stable transmission
and high grinding precision. The rear transmitting
plate is equipped with automatic cleaning device,
and can grind rear-transmitting plate by itself
to keep high precision for a long time. Auto
and manual oil supply system is equipped to
guarantee machine working under a good lubrication
condition to increase the stability. PLC and
HMI are adopted for control and display, operator
can preset the thickness of glass to be processed,
the remained thickness after grinding and the
width of beveling edge. |
| |
| Technical Data |
| Processing
speed |
0.4 ?C 5.0 m/min |
| Bevel angle |
3o ?C 45
o |
| Max. bevel
width |
60 mm |
| Min. glass
processing size |
25 x 25 mm |
| Glass thickness |
3 ?C 19 mm |
| Total power |
27.32 kw |
| Outer dimension
(m) |
8.25 x 1.51 x 2.235 |
| Weight
(kg) |
6800 |
|
| |
| Remarks: |
| 1. Custom designed is on
request.
2. All data and information listed in this document
are subject to final confirmation.
|
|
|
