Machine, jig and fixture
A series of special machine and
jig and fixture are required. Most of the customers
would be more concern about the bending and
tempering which is the critical part of the
whole process and the process of the stainless
steel strip is always ignored. Stainless steel
plays a very important role in the making of
top quality glass lid.
All the stainless steel processing
machines must be designed and built specially
for the purpose of making top quality stainless
steel profile which is suitable for the inlaying
onto the glass lid edge. Sophisticated jig and
fixture are also designed and made so that the
right shape of stainless steel profile is done
in second.
If the machine and jig and fixture
are not designed and built properly, it may
lead to following disadvantages,
1. stainless steel profile shape
is incorrect.
2. operator would find it difficult to load
and unload the stainless steel.
3. cycle time becomes longer.
4. processing would not be done in the right
way and thus, defect.
5. operator may easily get wound.
6. stainless steel profile may not easily be
fit around the glass edge.
7. stainless steel profile may not hold firmly
around the glass edge.
|
