Models |
G-VPB |
Bevel Profile |
Bevel & bottom pencil edge |
Nr. Of Spindles |
22 |
HMI Touch Panel Operator Interface |
Yes |
PLC |
Control glass thickness, bevel height, bevel angle & polishing spindles pneumatic cylinders |
Glass Thickness |
3 ~ 19 mm |
Bevel Angle |
3º ~ 15º |
Bevel Width |
0 ~ 85 mm |
Glass Speed |
0.4 ~ 5 m/min. |
Min. Glass Size |
150 x 150 mm |
Max. Glass Loading |
700 kg |
Main Convey |
Bearing |
Bevel Angle Adjustment |
Input in HMI regulating AC motor with encoder controlled by PLC, parameters displayed on HMI |
Bevel Width Adjustment |
Input in HMI regulating AC motor with encoder controlled by PLC, parameters displayed on HMI |
Glass Thickness Adjustment |
Input in HMI regulating AC motor with encoder controlled by PLC, parameters displayed on HMI |
Glass Speed Adjustment |
Turning knob on panel with frequency convertor |
Inlet / outlet Convey |
Timing Belts |
Water Tanks |
One for polishing (Customer provided 50 m3 pit for water) |
Water Pumps Motors |
AC Motors (2 x 0.4 kW for water / 2 x 0.4 kW for polishing powder) |
Power |
54.64 kW |
Voltage |
AC 380V / 3 phase / 50Hz (others on request) |
Weight |
16.6 tons |
Outer Dimensions (L x W x H) |
15350 x 1200 x 1800 mm |