Features
IG-TP-B
Introduction
IG-TP seroes two parts sealant extruding machine is designed to apply secondary sealant around insulated glass edges for final seal. It is applicable for most available sealants such as polysulfide, silicon and polyurethane, etc. These sealants are composed of two parts, Part A and Part B. Mixing ratio of Parts A and B is adjustable according to different materials and different manufacturers.
The process includes melting, pressurizing, scaling, mixing and extruding.
Structure
Pressure System
IG-TP-B employs hybrid pressurize system. Part A is powered by hydraulic while Part B is by pneumatic. Part A is sucked and is pressurized. Part B is sucked and is pressurized. They are transferred to high pressure piston for pressurization. The high pressure ball valve of Part B pneumatic system is used to release pressure during pressurization.
Scaling System
Flow rate of each component is then carefully scaled by this system.
Mixing System
Scaled components are transported to mixing system where they are thoroughly mixed together until consistent. The mixer is equipped with a one way valve. It is used to prevent the two components from flowing back to each other during mixing. The flow back may block the channels. Different sealant has different mixing ratios. Mixing ratio is adjusted until adequate ratio is obtained for particular sealant. This adjustment is done once for all.
Sealant Gun & Nozzle
Well mixed component are then transported through hose and is finally extruded through sophisticated sealant gun and nozzle.
