Models |
GHD-V-2550-1
|
GHD-V-2550-2
|
Nr. Of Drilling Spindles |
One pair (front & rear) |
Two pairs (each has two spindles, front & rear) |
NC Numerical Control |
Yes |
PLC |
Yes |
HMI Touch Panel Operator Interface |
Yes |
Rear Drill Spindle Feeding |
Automatic |
Front Drill Spindle Feeding |
Automatic |
Drill Holes Registration |
Automatic |
Max. Glass Size |
5000 x 2500 mm |
Min. Glass Size |
500 x 500 mm |
Vertical Distance From Glass Bottom Edge to Hole Edge |
80 ~ 2450 mm |
Glass Thickness |
5 ~ 25 mm |
Glass Drill Hole Diameter |
Φ4 ~ Φ100 mm |
Drill Holes Positioning Accuracy |
± 0.50 mm |
Concentricity Precision of Front & Rear Drills |
± 0.10 mm |
Glass Horizontal Travel Speed |
0 ~ 5 m/min. (by servo motor) |
Drill Spindles Up / Down Travel Speed |
0 ~ 4.2 m/min. (by servo motor) |
Spindles Rotational Speed |
Regulated by frequency converter |
Drill Spindles Forward / Backward Feeding |
Pneumatic |
Water Cooling |
Water running inside core dill bit |
Compress Air Consumption |
1 Lt/min. |
Compress Air Pressure |
0.6 ~ 0.8 MPa |
Power |
7.2 kW |
11.5 kW |
Voltage |
380 V / 3 Phase / 50 Hz (others on request) |
Weight |
2000 kg |
2200 kg |
Outer Dimension |
8000(L) x 1200(W) x 3700(H) mm |