Glass Bending Ovens

Features & Specs

Sliding Individual Glass Bending Oven (GBO-A-C)


Sliding Individual Glass Bending Oven
  • Two Station Budget Glass Bending Furnace
  • One Station is for Heating & Annealing while Another is Cooling, Loading & Unloading
  • Metal Structure with High Temperature Resistant Paint
  • Oven Body Wall Insulated with Thick Thermal Preservation Materials
  • Tilting Side Door is Heat Insulated with Thick Thermal Preservation Materials
  • Bending Mould Slides In & Out of Heating Station By means of Rails Tracks with Side Door Tilted Open
  • Tilted Side Door Provides Better & Efficient Annealing
  • Minimum Heat Loss with Lowest Possible Energy Consumption
  • Heating Elements Installed on Top of Heating Chamber
  • Each Heating Resistor is Individually Control by Corresponding Switch on Control Panel
  • Thermocouples Measure Real Time Temperatures



Bending mould is loaded in a rack running on rail tracks. Glass is loaded on bending mould. After It is pushed into heating station with side door tilted open, side door is closed by tilting down.


Glass starts to be heated up with all heating resistors turned on. When it becomes soft, it slowly falls down and approaches to bending mold by means of gravity. Operator begins to turn off proper heating resistors with respect to glass curvature until glass edges get in contact around the rim of bending mould.


Glass begins to anneal. If necessary, side door gradually tilts up to allow annealing in a better and efficient way.


When annealing is accomplished, side door is fully open. Bending mould slides out of heating station by means of rail tracks. It is then cool in open area.


When glass is cooled enough for handling, glass is unloaded and removed. Another glass is loaded on bending mould. If glass type is changed, bending mould is replaced by corresponding bending mould. Bending, annealing and cooling cycle are repeated.


Models GBO-A-C-1222 GBO-A-C-1525 GBO-A-C-1730 GBO-A-C-1737 GBO-A-C-1742 GBO-A-C-2540
Max. Glass Size (mm) 1200 x 2200 1500 x 2500 1700 x 3000 1700 x 3700 1700 x 4200 2500 x 4000
Power (KW) 40 56 80 98 112 157
Weight (kg) 1800 2500 3450 4270 4830 6800
Outer Dimensions (LxWxH) (mm) 2800 x 1800 x 1200 3100 x 2100 x 1200 3600 x 2300 x 1200 4300 x 2300 x 1200 4800 x 2300 x 1200 4600 x 3100 x 1200