Environmental protection treatment process

1. Join slaked lime of a certain amount waste water treatment among the pool, then can wash waste water is it abolish pond to be proper to mix to pour into after the glass.

2. Test waste water treatment liquid hydrogen PH of the pool through certain hour with hydrogen PH test paper while being every, look on as hydrogen PH = 7, stop putting into the waste water. After mixing, put quietly for 12 hours, the branch water of the upper strata can be discharged; the precipitate is removed to the rubbish pool.

3. Must operate continuously, must build another waste water treatment pool (one), act as quiet to put pool, discharge the rinsing, clear up the precipitate, (the 2nd) to deal with the waste water in the pool, analogize so.

Treatment equipment in environmental protection (according to 30M3 waste water of handling capacity / day)

1. Abolish the specification of the pond: Length 3.5m, width 3.5m, height 1.5m or length 4m, width 4m, height 1.2m.

2. The inner wall does the surface to seal with the cement while abolishing the pond.

3. The rinsing discharges the mouth and installs the silent stock tube; the erection site is fixed according to the demand of the place.

The equipment picture in environmental protection

1. Discharge and is in charge of adopting the plastic tube.

2. In charge of sealing with about 10 eyes of nylon filter screen with mouth, prevent discharging and is in charge of stopping up.

3. Drain off water and control the valve.

4. Should highly design and can regulate, do benefit to discharging the branch water.

5. If the treated rinsing must be recycled, arranging another pipeline lead to the production place.