Technology method and characteristic

No fingerprint glass is glass covered with sand firstly, go on spray punish and take the finished product with polishing liquid promptly and then. The working technique is steady, convenient, easy to master, the yield is high, the glass products surface dealt with is fine and smooth and soft, there is not hand sweat stain that is printed, it is difficult to scratch.

Process equipment sketch

1. Spray shelf use angle iron to weld, panel has 160 degrees inclination for convenient circumfluence.

2. Due to tank has big pressure; we suggest use PVC board welding.

3. In the middle of tank it has 20 eyes of nylon screen net, reducing acid-proof pump attrition and extending pump usage life.

4. Spray board use 0.5 cm PVC to weld.

5. Imbibition liquid in pump position it adopts 1.2 inch PVC pipe, it is convenience to fix valve and maintain.

6. Spray pipe uses 1 inch PVC soft pipe; spray gun by handle use six cents pipe and fix valve, it is convenience to control spray.

7. Decompression stirrer uses 1 cm PVC pipe.